Filter By:
- Show More Brands
- Show Fewer Brands
- Show More Sizes
- Show Fewer Sizes
- Show More Model Years
- Show Fewer Model Years
Cables
$9.98 - $18.85
Spiral cable wrap manages those messy cables to achieve a sleek clean look while protecting shifting, braking, and electronic bike cables and hoses.
$18.00
- Nano-polished ultra slick extruded cable is non-coated for ultimate smoothness and durability
- Compatible with Shimano/SRAM road and MTB shifters
- Pre-stretched for more responsive braking
- 1.1mm x 2300mm
$18.00
SRAM's Inline Barrel Adjusters are placed on your shift cables near the handlebars so that you can turn the adjusters to fine-tune your shifting. They feature durable and light aluminum/composite construction with rubber covers for easy operation.
$18.00
SRAM's Inline Barrel Adjusters are placed on your brake cables near the handlebars so that you can turn the adjusters to fine-tune your braking. They feature durable and light aluminum/composite construction with rubber covers for easy operation.
$17.99
Fittings for converting open loop housing holders on a frame to traditional cable stops.
- Fits snugly inside open loop and receives 5mm housing with no end cap
- Small flange for smaller hydraulic loops
- 50-pack
$17.99
Inline adjusters make on-the-fly derailleur cable tension adjustments safe and easy.
- 5mm
- Stronger detent mechanism for use with brake housing
- Perfect for mechanical disc brakes
$17.99
Inline adjusters make on-the-fly derailleur cable tension adjustments safe and easy.
- Indexed adjustment for braided shift housing
- Not recommended for use with brake systems
- Size: 4.5mm
$12.99 - $17.99
Slick stainless cables undergo a polishing process to further remove imperfections. This creates a smoother surface with lower friction than PTFE-coated cables. With no coating, these are highly durable and compatible with all performance housings and lubricants. Typically used on high-end bikes, by riders wanting improved performance.
Pro Polished cables eliminate the need for flaky coatings with an innovative polishing process to reduce friction and improve performance.
- Polished stainless steel construction for low friction
- Compatible with all performance housing and lubricants
- Cables are tinted gold for easy identification
$17.99
Jagwire Elite Link End Cap Packs include each of the specialty housing end caps found in the corresponding Jagwire Elite Link DIY kit.
- Includes specialty end caps for the Road Elite Link Brake Kit
$17.99
Alleviate brake cable alignment and tangles with Origin-8's Rear-Mount Cable Hanger. Made from forged aluminum, it mounts to most brake bridge mounting holes and is great for solving tricky cantilever brake set up problems.
- Forged aluminum construction
- Mounts to most frame mounting holes
- Great for tricky cantilever brake setups
- Lightweight design
$17.00
- Nano-polished ultra slick extruded cable is non-coated for ultimate smoothness and durability
- Double ended for Shimano/SRAM road and MTB brake levers
- Pre-stretched for more responsive braking
- 1.5mm x 1700mm
$16.99
Origin-8's Alloy Braze-on Inserts convert hydraulic pass-throughs to cable stops so you can run full length housing. Designed for frames with pass-through braze-ons and sold in a bag of 10.
$16.49
Replacement parts for Jagwire's Elite Link kits keep things functioning as intended.
- Extra links for long housing runs or replacing damaged sections
- 20 links at 10mm of length each
$10.99 - $15.99
- Slotted aluminum barrel adjuster with backing nut for common brake levers
$15.99
- Upper cables measured from brake lever to detangler top plate
- Lower cables are measured from detangler to cable stop/London mod
- Includes adjusters compatible with most detangler styles
- Use: Upper
- Length: 11 - 12.5"
- Diameter: 1.5mm
$15.99
Origin-8's Braze-On Cable Stop with adjuster allows you to convert to STI style shifters. They mount onto down tube Braze-on bosses and are machined alloy with an anodized finish. The lightweight design lets you make the conversion without adding too much extra weight. One pair per package.
$15.99
- Stainless steel die-pulled and polished super-slick brake cable with electrolysis coating
- Electrolysis coating offers an ultra-smooth surface finish that greatly reduces friction for outstanding braking performance
- SRAM/Shimano compatible head
- Extra-long 2800mm cable length
- Use: Front or Rear
- Length: 2800mm
- Diameter: 1.5mm
- Style: MTB
$15.19
Origin-8's Pro Cable Guide Pulley fulfills all your special cable routing needs. Designed to clamp onto seat tube, it allows you to route your cable for bottom pull front derailleurs. Uses a sealed bearing pulley.
$15.00
Cables are coated with a durable low-friction polymer.
- Dupont Tefzel coating is more durable than previous coated cables
- Length: 2350mm
- Diameter: 1.6mm
- Double Ended: No
$14.99
Want the best combination of braking power and cable strength? Box Two Linear Brake Cable Kits start with custom housing that includes stainless steel mesh-wrapped linear wires for The inner cable wires are stainless steel, so they won’t rust over time. Each cable kit includes 63 inches of Linear housing, a BMX-race specific stainless steel cable wire, two black brass ferrules, and two black alloy cable end caps.
FEATURES
- 63 inches of Linear housing
- BMX-race specific stainless steel cable wire
- Two black brass ferrules
- Two black alloy cable end caps
- Stainless steel cable wires
SPECIFICATIONS
- Weight: 24 grams / 0.84 ounces
$9.99 - $14.99
- BMX brake cable kits for front or rear application
- 1.5mm galvanized inner slick cable
- Cable length: 1700mm / 67-inches
- Housing length: 1750mm / 69-inches
$14.99
- Upper cables measured from brake lever to detangler top plate
- Lower cables are measured from detangler to cable stop/London mod
- Includes adjusters compatible with most detangler styles
- Use: Lower
- Length: Dual Cable
- Diameter: 1.5mm
$14.99
- Upper cables measured from brake lever to detangler top plate
- Lower cables are measured from detangler to cable stop/London mod
- Includes adjusters compatible with most detangler styles
- Use: Lower
- Length: Fits most
- Diameter: 1.5mm
$14.99
- Upper cables measured from brake lever to detangler top plate
- Lower cables are measured from detangler to cable stop/London mod
- Includes adjusters compatible with most detangler styles
- Use: Upper
- Length: 7.5 – 9.5-inch
- Diameter: 1.5mm
$14.99
- Upper cables measured from brake lever to detangler top plate
- Lower cables are measured from detangler to cable stop/London mod
- Includes adjusters compatible with most detangler styles
- Use: Lower
- Length: X-Long
- Diameter: 1.5mm
$14.99
Jagwire's M6 Adjusting Bolt is a metal adjusting barrel that is the correct replacement adjusting barrel for the cable clips/hangers found on many cable brake systems old and new. It makes it easy to tighten/loosen your brakes without tools. Its 6 x 1.0mm threading fits most clips/hangers and it has a lockring for locking your brake adjustment once it's set. You get a pack of 25.
$5.99 - $14.99
Sport level brake cables come in a variety of cable end setups to fit most bikes at a quality level well above normal OEM cables.
- Slick cables are die-extruded for smooth operation
- Pre-stretched
- SRAM/Shimano mountain compatible cable end
- Stainless steel construction resists corrosion
- Single end cable features weld-cut for easy installation
$5.49 - $14.99
Jagwire's Road Brake Inner Wire is a high-quality brake cable made of stainless steel for excellent braking performance, corrosion resistance and durability. It comes in Campagnolo and SRAM/Shimano models and lengths to fit single and tandem bicycles.
$5.49 - $14.99
Jagwire's Sport Slick Stainless Shift Cable is a high-quality shift cable made of stainless steel for excellent shifting performance, corrosion resistance and durability. It also comes in lengths to fit single and tandem bicycles.
$14.99
This is Odyssey's top-of-the-line brake cable that ties together all of their most advanced braking technology.
- Utilizes the original BMX Linear Slic Kable housing to prevent binding when the bars are rotated.
- Factory installed ferrule ends with inner volcano shape to prevent housing blow out; a Linear Slic Kable standard since 2008.
- Specially coated inner wire for ultra low friction, a proven feature resurrected from their once famous Brakeline cables.
- Gyro lug included at one end of the inner wire for use with detanglers.
- 60-65mm in length.
- Black