Filter By:

  • Show More Brands
  • Show Fewer Brands
  • Show More Prices
  • Show Fewer Prices
  • Show More Sizes
  • Show Fewer Sizes
  • Show More Model Years
  • Show Fewer Model Years

Wheels

Wanna go faster? Try a new set of wheels!

Don's Bicycles has an excellent selection of bike wheels for everyone. Whatever style bike you ride, we have a wheel set and parts for you. We carry great brands like Mavic and Shimano and other. Stop by and let our expert staff help you with the correct wheel size for your rig!

CycleOps Trainer Skewer
$12.99
CycleOps' Trainer Skewer ensures your trainer will hold your rear wheel in place. Made of heavy-duty stainless steel, it will provide years of reliable use and keeps your high-end skewers pristine.
Stan's NoTubes Standard Tubeless Kit
$63.95
Going tubeless allows you to run low tire pressure for better traction while drastically reducing the chances of a flat. Stan's Standard Tubeless Kit converts standard tubed wheels to tubeless so you can reap the benefits. Everything you need to go tubeless is included. Plus, you won't miss dealing with flat tires and you'll save money on tubes!
Zipp 303 Firecrest Carbon Disc Brake Rear Wheel (Clincher)
$1,300.00
Zipp makes the impossible possible with their 303 Firecrest Carbon Disc Brake wheels—they're equally at home on the flats as they are in the mountains. The 45mm-deep rims slice through the wind more efficiently than even many deep-section wheels thanks to their 28.5mm-wide dimpled rims. And, by creating a seamless junction between rim and tire, the increased width further reduces drag. The 303s climb with the best and re-accelerate out of corners like rockets since they barely register on the scale, which makes them a must-have on undulating terrain. The extra wide rim also allows running wider tires at lower pressures with less fear of pinch flatting, which boosts ride quality and comfort and reduces rolling resistance. Plus, Zipp's 77D/177D disc hubs gives you incredible stopping power in wet and dry conditions alike, and they're thru-axle compatible (sold separately) for jaw-dropping steering precision and power transfer. You also get Sapim's oustanding CX-Ray spokes.
Sunday Storm Front Hub
$39.99
Sunday’s Storm front hub features a low-flange aluminum hub shell with female chromoly axle and precision sealed bearings. It uses 3/8-inch chromoly axle bolts that include 17 mm wrench flats and 6mm allen wrench tightening options. - Female axle with 3/8-inch chromoly bolts - Low-flange design - 36-hole
Sunday Rim Strips
$4.99
Sunday rim strips are printed with Sunday's Cornerstone logo along the entire strip. Available for 20-inch rims only and come as a pair of two strips.
Sunday Thundercoaster Rear Wheel
$219.99
Sunday brings you a reliable, high-function rear wheel with their Thundercoaster. It’s laced up with their popular Thunder Rim, a welded, double-wall rim specifically built to be as affordable as possible while maintaining an excellent combination of strength and weight. At the center of the action is a freecoaster hub with the same KHE clutch internals used industry-wide to complete a reliable, smooth-spinning wheel with the durability you demand.
Sunday Lightning Rim
$19.99
Sunday's Lightning Rim is a single-wall rim that can hang all day with more expensive double wall rims. The added strength is found in the rim’s extra-thick sidewalls, flat-top bead hooks, and geometry cues taken directly from pricier rim designs. The Lightning Rim offers great performance at an exceptional price, and it comes from the same designers that create proven rim designs for Odyssey and G-Sport.
Sunday Storm Cassette Rear Hub
$109.99
Sunday’s Storm cassette hub features a low-flange design with precision sealed cartridge bearings and 14mm chromoly center axle. It is secured to the frame with 3/8-inch axle bolts that have both 17mm wrench flats and 6mm Allen wrench sockets. The Storm uses a sealed 9T chromoly driver to send your power to the rear wheel. - Female axle with 3/8-inch chromoly bolts - Low-flange design - RHD - 36-hole
Sunday Thunder Rim
$54.99
With their Thunder Rim, Sunday set out to create a welded, double-wall rim that was as simple as possible to manufacture, and therefore, as affordable as possible. But, it still had to have an excellent combination of strength and weight. They nailed it. The Thunder Rim is both reliable and lightweight, and it comes from the same designers who brought you the proven rim designs from Odyssey and G-Sport. - Material: 6061 aluminum - Construction: Double wall - Joint: Welded - Drilling: 36 holes
Kurt Kinetic Trainers Skewer
$12.00
Kurt Kinetic's Skewer is an affordable, steel quick-release that perfectly fits into all Kurt Kinetic trainers. Use it instead of your nice aluminum quick release so it stays in pristine condition. • 130mm width
WTB TCS AL 34mm Presta Valve
$24.95
WTB's TCS AL valves are aluminum to shed grams, and come in catchy anodized red, black, or blue. A stepped lock nut adds compatibility among various rim drillings, a smooth pump interface makes adding air easy, and a removable core makes setting beads and injecting sealant a cinch. - Presta - 34mm
DT Swiss 240s Straightpull Road Front Hub
$169.00
The DT Swiss 240s Straightpull road hub hits the sweet spot between light weight and reliability. The straight pull spoke design makes for a stiff, responsive wheel that will roll for thousands of nearly frictionless miles.
DT Swiss 350 MTB 6-Bolt Front Hub
$80.00
DT Swiss' 350 MTB hub delivers the amazing performance you've come to expect from DT Swiss at an incredible value. Fast and reliable, these 6-bolt disc hubs will roll for thousands of nearly frictionless miles.
Hope Pro 2 Evo SRAM XD Driver
$108.38
Hope XD-11 Freehub Bodies · For XD 11-speed cassette · For Hope Pro 2 EVO hubs · Contains drive side end cap, bearings and driver
Origin8 Pro Pulsion Rim Strips
$4.59
Origin-8's Pro Pulsion Rim Strips are made from a super-durable, environmentally friendly PVC material.
Origin8 DAT-PRO-101 Fatbike Rim
$59.99
• Size: 26 x 4.0 • ISO: 559 • Double Wall Construction • Non-machined Side Wall • Color: Black • Drill: 36 • Weight: 1,579 grams • Width: 100mm • Rim depth: 29.5mm
Origin8 RD1100 Rear Road Hub (11-speed Campagnolo)
$99.99
• Machined and forged alloy construction • Sealed cartridge bearings • Lightweight design • 9/11-speed Campagnolo cassette body • 32-hole spoke drilling • Quick-release • 130mm hub spacing • 382g • Black and silver
GSport Ribcage Rim
$174.99
The Ribcage has been one of the only rims to have true design breakthroughs in the last few years, since its introduction the competition has scrambled to catch up but still remain a poor copy, so if it doesnt say G-Sport on the rim, don't expect it to perform like a G-Sport rim. The Ribcage is a light weight rim that can take anything you throw at it. With the ribcage the spoke holes are re-enforced with patented ribs that support the sides of each spoke nipple and eliminate the possibility of nipple pull through under even the highest loads. The rim also features cross-over-spoke lacing, where each spoke goes from one side of the hub to the opposite side of the rim for an increased angle and therefore increased lateral strength. The outer walls are extra thick to protect against case dents, while the other walls are extra thin to keep it light. The entire design revolves around the use of a proprietary high strength aluminum alloy made specially for us in an on-site foundry . At 500 grams, the strength to weight ratio of the Ribcage cannot be matched. The 36mm width and 18mm height are also major factors in the design, spreading out the impacts and maximizing resistance to pinch puncturing. GSport offers rims in HARD anodized finishes rather than the decorative anodizing used by most companies. All of these advantages create the premier rim, but do effect the cost. TECHNICAL SPECIFICATIONS - Sizes: 20" Only - Drillings: 36 and 48 - Weight (Hard Anodised): 500g /17.6oz - Weight (Chrome Plate): 540g / 19oz - Width: 36mm ERD: 389
Easton EA70 Rear Wheel
$324.99
Add some speed to your everyday rides with Easton's EA70 wheels. They feature lightweight, semi-aero aluminum rims that are a nice 17.5mm wide to excel on the flats, up steep grades and everywhere else you want to go. The enhanced width also aids in cornering. Plus, the EA70s come spec'd with Easton's superb sealed-bearing hubs and they're hand built too, for superior ride quality and impressive durability.
Odyssey Antigram Hub Guards
$19.99
Designed specifically for use with Odyssey's Antigram FRONT or REAR hubs. SPECS - Forged from 7075-T6 aluminum for greater strength and durability - Steel insert prevents guard deformation, prolonging bearing life
Odyssey Antigram Rear Hub
$179.99
The Antigram is a 36-H rear hub that is strong, light and reasonably priced with in-bound axle bolts that is both RHD/LHD switchable and guard compatible. SPECS - 2014-T6 forged aluminum hub shell - 6903RS sealed cartridge ball bearings - 9-T driver with 3-Pawn independent springs design and precision caged needle bearings - RHD/LHD switchable WEIGHTS - With 14mm Chromoly Axle: 14.5oz / 411g - MEASUREMENTS Drive Side - Effective Flange Diameter: 49mm - Non-Drive Side Effective Flange Diameter: 49mm - Drive Side Flange to Center Distance: 30mm - Non-Drive Side Flange to Center Distance: 30mm
Campagnolo Eurus Clincher Wheelset
$1,165.00
Campagnolo's Eurus wheels are tailor-made for rolling courses where you need lightness for the climbs balanced with aerodynamics for higher speeds on the flats. The semi-aero aluminum rims are milled between the spoke holes to keep the weight down while the bladed spokes slice through the wind. Plus, these speedy hoops boast Campy's legendarily smooth bearings for a fast, frictionless ride.
Origin8 RD1100 Rear Road Hub (11-speed Shimano/SRAM)
$79.99
• Machined and forged alloy construction • Sealed cartridge bearings • Lightweight design • 8/11-speed Shimano/SRAM cassette compatibility • 20, 24, 28, 32, 36-hole spoke drilling • Quick release • 130mm hub spacing • Black or silver
Chris King R45 Front Hub
$230.00
Chris King's R45 road hubs are the lightweight choice for your next wheelset. From Chris King's in-house fabricated stainless-steel bearings to their light and strong aluminum hub shells, the R45 front hub sits at the nexus of speed and durability. Multiple drilling options and Chris King's nine anodized colors mean you can build your ultimate wheelset.
DT Swiss Spoke Head Washer
$90.00
- Designed to stabilize 15g spokes in most hub flanges
DT Swiss Prolock Hexhead Alloy Nipples
$51.90
- ProLock: pre-prepped/treated nipple threads with special compound - Hexhead (14g only) design for building/truing at nipple head, in addition to 4-sided flats at rim protrusion - Form-A design assures smooth fit and build - Cold-forged nipple blank machined to DIN 79012 specs - 14mm overall length (2mm taller hexhead for wrench interface, but protrusion through rim is the same as a 12mm DT nipple) - 2.0mm (14g) spoke thread interface with full run-through - Made in Switzerland. - Box/100
WTB Asym TCS Rim 29-inch
$89.95
Asym rims use an asymmetrical design to create a rim that evenly distributes tension, doesn’t require dishing, and makes for a faster wheel assembly. High end WT69 Alloy and an open cavity design keep Asym weights down while eyelets prolong longevity and prevent binding. Featuring a full TCS (tubeless compatible system) inner rim profile, Asym rims provide a lightweight, higher performance value-driven option that works exceptionally well with wheel building machines.
Origin8 RD1100 Front Road Hub
$59.99
• Aluminum hub body • Quick release • 100mm OLD • 20, 24, 28, 32, and 36-hole spoke drilling • Black or Silver
Stan's NoTubes Enduro Rim Strip
$22.50
Stan's Enduro Rim Strip converts standard tubed wheels to tubeless so you can reap the benefits. Going tubeless allows you to run low tire pressure for better traction while drastically reducing the chances of a flat. Stan's rim strips create a tight seal with the tire bead, reducing the instances of "burping". Plus, you won't miss dealing with flat tires and you'll save money on tubes!
Stan's NoTubes Cross Country 29er Rim Strip
$22.50
Stan's Cross Country 29er Rim Strip converts standard tubed wheels to tubeless so you can reap the benefits. Going tubeless allows you to run low tire pressure for better traction while drastically reducing the chances of a flat. Stan's rim strips create a tight seal with the tire bead, reducing the instances of "burping". Plus, you won't miss dealing with flat tires and you'll save money on tubes!
Page 1 of 44 Next page