Tools

Our 2437 open bore adapter is used to press 24x37 sealed bearings into bottom bracket cups, and direct fit frames like trek BB90. The adapter is machined with one step at 24mm ID, which fits into the center of the sealed bearing. - Installs: 24x37 bearing - Inner step outer diameter: 23. 8mm - Outer diameter: 36. 8mm - Thru hole diameter: 0. 387" (9. 8mm) - Inner hole sized to fit 1/2" threaded rod - Compatible with BP0006, BP0007 - Machined, red anodized aluminum - Sold individually (2 drifts required for some installations)

Our 6806 open bore adapter is used to press 42x30 sealed bearings. The adapter is machined with one step at 30mm ID, which fits into the center of the sealed bearing. Common bearing size for BB30 frames and bottom brackets. - Installs: 6806 bearing - Inner step outer diameter: 29. 9mm - Outer diameter: 41. 8mm - Thickness: 7mm - Thru hole diameter: 0. 387" (9. 8mm) - Inner hole sized to fit 1/2" threaded rod - Compatible BP0006, BP0007 - Machined, red anodized aluminum - Sold individually (2 drifts required for some installations)

Our GXP-LEFT open bore adapter is used to press 22x37 sealed bearings into SRAM GXP bottom bracket cups and direct fit frames like trek BB90. The adapter is machined with one step at 22mm OD, which fits into the center of the sealed bearing. - Installs: 22x37 (GXP) bearing - Inner step outer diameter: 21. 9mm - Outer diameter: 36. 8mm - Thickness: 7mm - Thru hole diameter: 0. 387" (9. 8mm) - Inner hole sized to fit 1/2" ACME threaded rod - Compatible with BP0006, BP0007 - Machined, red anodized aluminum - Sold individually

Wheels Manufacturing open bore adapters are used to press sealed cartridge bearings into place. The adapters are machined with one step to correspond to the bearing OD, which fits in to the center of the sealed bearing and an outside diameter to accommodate the bearing's outer diameter. Size: [Bearing inner diameter] x [Bearing outer diameter] Note: If only one dimension is given, that is the outer diameter of the adapter, with no inner diameter step

Wheels Manufacturing Over Axle Adapters are used for pressing your most commonly used bearing sizes into place. Each represents an excellent addition to the Press-4 Bearing Press. - Adapters sold individually

- Service tool for removing/Installing the torx-Shaped piston-Bore cap on hope mono-Series and moto monoblock calipers

A handy tool designed to make installation and removal of bicycle electronic shifting wires and batteries quick and easy. The durable composite body features our iconic three-way wrench shape and prevents scratching of expensive components. Angled ends allow for safe installation and removal of Shimano Di2 E-tube EW-SD300; wires in tight spaces. Universal coin cell tool helps remove and install battery covers on SRAM AXS and other electronic accessories. - Compatible with Shimano Di2 E-tube, EW-SD300 wires (nominally 3 mm OD connector) - Not compatible with Shimano Di2 E-Tube EW-SD50 wires (nominally 5 mm OD connector) — use the Park Tool EWS-1

Park's Bladed Spoke Holder is a must for building and truing wheels that feature bladed spokes. It has 4 different size slots to fit a wide variety of bladed (aero) spokes from .08 to 2mm wide. It holds them safely in place to prevent twisting as you turn the nipple to true and tension the wheel.

A handy tool designed to make installation and removal of bicycle electronic shifting wires and batteries quick and easy. - Durable composite body is durable and prevents scratching of expensive components - Angled Shimano Di2 E-TUBE ends allow for both installation and removal in tight spaces - Universal coin cell tool helps remove and install battery covers on SRAM eTap

Park's Offset Brake Wrench utilizes a unique design that allows it to reach into tight areas that other wrenches cannot. The OBW-3 features a 14mm wrench on one end and the other end fits into a brake's tension springs to rotate the brake around its bolt for proper alignment. The OBW-4 features 10-, 11-, 12-, and 13-mm opening to fit most models of sidepull brakes.

Park Tool is world-renowned for their bicycle industry tools, and their pumps are no exception. Keep yours up to speed and working smoothly with these rebuild kits. - 1096K: Contains one #1081 head as well as one #1075 plunger gasket for older PFP-2 and first generation PFP-4 floor pumps. Also compatible with second-generation PFP-4 floor pumps. - 1096X: Contains one #1096R head, one #1472 fitting, and one #1075 plunger gasket for second generation PFP-4 floor pumps. Also compatible with PFP-2 and first-generation PFP-4 floor pumps. - 1096Z: Contains one #1096R head, one #1472 fitting, and one #1087 plunger gasket for PFP-5 and PFP-7 floor pumps. Also compatible with PFP-3, PFP-6, and PFP-8 floor pumps.

Park's Cone Wrenches are made of durable tool steel and are nice and thin to fit on the small-clearance cones found on hubs and other bearing assemblies. Plus, they work as regular wrenches, too. They feature Park's special Y heads that put more material where it's needed for excellent durability and strength. Most applications require at least 2 cone wrenches. If you have questions please contact us and we can recommend the correct sizes for your needs.

Park's Cone Wrenches are made of durable tool steel and are nice and thin to fit on the small-clearance cones found on hubs and other bearing assemblies. Plus, they work as regular wrenches, too. They feature Park's special Y heads that put more material where it's needed for excellent durability and strength. This 23mm size fits Shimano 15mm through-axle hubs. Some applications require at least 2 cone wrenches. If you have questions please contact us and we can recommend the correct sizes for your needs.

Park's Cone Wrenches are made of durable tool steel and are nice and thin to fit on the small-clearance cones found on hubs and other bearing assemblies. Plus, they work as regular wrenches, too. They feature Park's special Y heads that put more material where it's needed for excellent durability and strength. This 24mm wrench fits Shimano 15mm through-axle front hubs and many suspension-fork top caps. Some applications require at least 2 cone wrenches. If you have questions please contact us and we can recommend the correct sizes for your needs.

Park's Shop Cone Wrenches are made of durable tool steel and are thin to fit the low-clearance adjusting nuts and cone flats on hubs and other bearing assemblies. Park's special Y-heads put more material where it's needed for excellent durability and holding power. The 26mm size fits through-axle end caps and suspension fork crowns. Most applications require at least 2 cone wrenches. Call or stop by. We can recommend the correct sizes for your needs.

Park Cone Wrenches are made of durable tool steel to fit the low-clearance adjusting nuts and cone flats on hubs and other bearing assemblies. Park's special Y-heads put more material where it's needed for excellent durability and strength. The 28mm size fits newer Shimano 20mm through-axles, as found on XT, XTR and Saint hubs. Most applications require at least 2 cone wrenches. Call or stop by. We can recommend the correct sizes for your needs.

All metal cup made of 304 Stainless Steel.

Prestalever is Quicker and Speedier than anything you've ever used. Our Patent-Pending Rim Hook with Honeycomb reinforced Box-Section Design is the key to our faster, safer, easy-to-use tool. Remove tires in seconds! Prestalever is Quicker and Speedier than anything you've ever used. Our Patent-Pending Rim Hook with Honeycomb reinforced box-section is the key to our faster, safer, easy-to-use tool. As you scoop the tire bead with the Prestalever, the slot underneath we call the "rim hook" naturally drops inside the rim. It prevents the Prestalever from slipping out, so you don't drop the bead. The rim hook stops the Prestalever at an easy-to-hold angle on the side of the rim. Then you simply glide the lever around the rim, and the tire peels-off as you go. The Prestlever is made of slippery Nylon, greatly reducing the force needed to remove tires. When you're done, twist the Prestalever 90 degrees to raise the rim hook out of the rim. Our box-section design allows the twist-action to easily stop at 90 degrees so the lever slides out easily. Install tires without strain. Our thick tip on the tire installer-end prevents catching and pinching tubes inside your tire. The bead-grabbing edge gives the right balance between leverage and lifting force, making it as easy as possible to complete tire installation. Presta Core tool is now essential. Even Bicycle Presta tubes now include removable cores. This gives you the added option of using tire sealant inside the tube of your standard tire. Removable cores are not always fully tightened at the factory. A loose core could cause slow leaks, or could even become unscrewed while using inflation devices. Tubes should be checked during installation and regularly afterwards for Presta core tightness. Don't carry an extra tool for chains! The Prestalever quick-link breaker is an effective emergency tool if you need to remove your chain on the road. The Patented design is the creation of Prestacycle's good friend and associate – cycling engineer Tomo Ichikawa. It removes the quick-link, which is the only function you need. When quick links are installed, pedal pressure can lock the installed quick link without any tools. For regular chain service, we still recommend a quick link tool, but with our feature, you no longer need to carry a separate tool with you on the bike. Quick-link removal Instructions: Place the quick Link near the top of the crank Jump the chain forward one tooth so the quick-link stands-up Use the slot on the Prestalever to push down FIRMLY. (The crank tooth will support the other end from underneath.) T-handle Tubeless Tire Plugger (optional parts required – Available 12/15/2021) The center of the Prestalever has threads which accept our Tubeless tire plugger. It then forms a T-Handle for effective, centered pushing of the included "Bacon Strips" used to seal large cuts in Tubeless tires. Third-hand Tool for Hand Installation Certain tires have delicate beads. Tire manufacturers recommend hand-installation only. The Prestalever can be used as a "third-hand" tool. When you hand-install the bead in one direction, the tire starts lifting-out at the other end. Insert the lever at one end to hold the bead, then use BOTH hands to install the tire from the other end. Tubeless Tire Removal (or any Difficult Tire) The Prestalever is the #1 tool for removing difficult tires. Using two or three can help with the toughest tire and wheel combo's. Insert a lever, but do NOT flip it yet. The rim hook will hold the lever in place, but unlike traditional levers that hook onto spokes, the bead will NOT be tensioned. You can still fit-in more Prestalevers. Insert the levers spaced about 6 inches apart, then flip them all … one-at-a-time. Even the toughest tires will come right off the rim in seconds. Prestalever is different… designed from the start with real-world experience on bicycles. Specifications: - One-end: purpose-designed Tire Remover - The-other-end: purpose-designed Tire Installer - Presta Valve Core tool - Quick-link Chain breaker. - Threads make it a T-Handle Tubeless Tire plugger (plugging kit additional). - Use multiple levers for tough, delicate tires like Road Tubeless and Gumwall. - Dimensions: 100mm x 13mm x 12mm - Weight: 13 grams Disclaimer: Check with the manufacturer of your wheels and tires to verify application and fit. Some manufacturers specify hand installation and removal only. Always follow Manufacturer guidelines for tires and wheels.

Highest quality bits Prestacycle offers the highest possible quality 1/4" hex tool bits for use on Bicycles and much more. Our bits are compatible with all Prestacycle hex-based hand tools, and are industry-standard to fit all other tools that use 1/4" hex bits. Engineered for long life All Prestacycle Professional bits are made with hardened S2 steel, which is much stronger than most hand tools which are made of CRV Steel. S2 steel also resists stretching, preventing rounded edges on the bits that could damage bolts. We apply nickel-plating to all Professional bits to prevent marring to Stainless Steel, Aluminum and Titanium screws and to provide a long-lasting finish. Specific hex bits have micro surfacing to reduce slippage when in use. JIS Compatible Prestacycle bits sets do NOT contain U.S. Philips heads, which were specifically designed in 1932 to round-out as an alternative to torque tools. These are modern ANSI standard (compatible with the discontinued JIS standard) and can be used on any bicycle cross head bolt. (3) Hardened S2 steel Nickel-plated Professional bits in a Patented Bits Carrier. 100mm Extended length bits fit bicycle specific applications like underneath Road Brake Hoods and through the wheel for Disc Brakes. Stronger and longer lasting than any other tools made for bicycles. Since worn heads can damage bolts, these bits protect your components. Specifications: - (6) Precision hardened bits in a Patented Bits Carrier - 100mm rounded shaft bits fit recessed bolts - Professional bits made with hardened S2 steel - Nickel-plated for a long lasting finish that prevents marring - They resist rounded edges to protect your bolts - Compatible with all Prestacycle hex-bit hand tools - Fit underneath Road Brake Hoods and through the wheel for Disc Brakes - Industry-standard to fit all other tools that use 1/4" hex bits - Specific hex bits have micro surfacing to reduce slippage when in use Sizes: - HEX: 4mm, 5mm - TORX®: T25

Topeak's Mini 6 is a great way to take along the essentials in a tidy and super-light package! Its forged-aluminum body includes: 2, 3, 4, 5 and 6mm Allen wrenches, and a Phillips screwdriver.

Topeak's Shuttle Levers are strong enough for even the busiest shops; think what they'll do for that tight road tire and fat downhill rubber. These levers are extra long for leverage and are made of engineering-grade plastic with stainless-steel reinforcements down the middle that ensures years of hard use.

- OE replacement kit for Finish Line Pro Chain Cleaner, includes brushes, scrubbers and pins

- Complete set of replacement seals for Jagwire Elite Mineral Oil Bleed Kit - Red seals provide easy identification for use with mineral oil systems only

The Pro Internal Cable Routing Tool uses a rare earth magnet that attaches directly to cables, housing, hydraulic hose, and electronic shifting wire, and can be fed directly though difficult internal setups without the need for a separately routed "lead wire." - This pack includes replacement fittings to attach magnet to cables, housing, hydraulic hose, and electronic wire

Lezyne's 3-Way Spoke Wrench packs three frequently used spoke wrench sizes into the palm of your hand. It features CNC-machined wrench faces for precise tool engagement of each 3.22, 3.30, and 3.45 size.

- Multi-function chain wear checker and chain holder. - Constructed from precision machined stainless steel. - Integrated valve core tool and bottle opener. - Included steel ring for hanging storage. - Works with 5 to 12-speed chains.

Precision brake bleeding tools and adaptor kits for Magura brake systems. - 30mL graduations

- Paintbrush-like shape for easier application and cleaning

- Makes the installation of hydraulic disc brake calipers quick and easy - Helps properly align a hydraulic disc brake caliper with the rotor - Ensures even spacing between disc brake pads and rotor - Compatible with all styles of hydraulic disc brakes - Durable stainless steel construction

• 12” Tungsten steel hacksaw blade specially designed to smoothly cut carbon composite handlebars, forks, seat masts, seat posts, etc. • Fits Park Tool SAW-1 Hacksaw and most 12” hacksaws • The CSB-1 is designed for use with the SG-8 Saw Guide. NOTE: Similar to a grinding stone, do not use this blade on aluminum