Skip to main content

Filter By:

  • Show More Brands

  • Show Fewer Brands
  • Show More Sizes
  • Show Fewer Sizes

Fenders

$16.00
Just the thing for rainy weather, the Portland Design Works minimalist Origami Front Fender attaches to a snap-on/off bracket you mount on your downtube. And it folds flat so you can easily stow it when not in use. - Length: 370mm (14.5") - Weight: 60g (2.1oz)
$16.99
A beefy downtube fender for big tires Planet Bike designed the Big Buck fenders to stand up to all of your fat tire adventures. The downtube-mounted fender’s extra wide 5-inch profile shields your shoes and blocks snow, spray and crud when rolling on your 5-inch wide fatties. It's a beefy fender for big tires. - Durable all-weather polypropylene blade - Two-point rubber strap attachment for quick mounting and removal - Eyelets Required?: No - Wheel size: 26", 650b, 29" and 700c - Fender width: 110-120mm for 3-5" wide tires - Max tire width: 5" - Weight: 95 grams
$17.99
Sunlite's Seatpost Clamper fender simply clips on to your seatpost and provides you with good coverage for those sloppy rides. It'll fit almost any seatpost.
$18.95
Specifically designed for 27.5” and 29” wheeled MTB’s. The DeFender front and rear fenders are the perfect choice for lightweight durable mud protection on those wet and sloppy rides. Quick release allows DeFenders to be installed and removed in seconds. A highly polished underside helps prevent dirt buildup and aids in cleaning. Fits 27.5” – 29” MTB tires up to 3” wide. - QR fork attachment fits 19.6mm/26mm/27.7mm/35mm steerer tube - Two tone injected high impact resistant plastic - Weight: 233 grams - Rear angle adjustable - 73x21x11cm/28.7x8.3x4.3-inch
$18.99 - $19.00
Portland Design Works has given the original fat bike front fender a facelift! The Mud Shovel 6.5 Front Fender was designed specifically for fat bikes - they're extra long and wide to block the muck, snow, or sand you'll ride through on your next fat bike adventure. Made of heavy-duty polymer, the Mud Shovel 6.5 Front Fender is super lightweight but sturdy enough to take years of bad weather abuse. The fender mounts to the downtube of your bike using adjustable rubber straps for a secure fit. - Front fender is 254mm wide and 622mm long (10" x 24.5") - Extra-long, wide design blocks snow, water and sand - Bracket keeps fender super stable and is easy to install - Built with lightweight, sturdy materials for durability
$18.99
Following a design update, the HIGHTREK clip-on mudguard set impresses with its sporty look. It can be mounted to seat tube diameters of between 28 and 32mm. The well-thought-out universal fastener and clip enable the mudguard to be mounted and removed quickly without any tools.
$18.99
SKS's S-Blade rear fender attaches easily to almost any road bike seatpost, protecting you from road spray and letting you ride through the wet.
$19.00
- Unique softer PP material helps prevent cracks in extreme temperatures - UV resistance for increased durability. - Proprietary bracket design helps keep fender stable on the bike - Front model fits most down-tubes - Rear model offers adjustable angle
$19.99
The Grunge front fender was made for your messiest dirt adventures. It's super durable and provides exceptional coverage from mud, crud and spray. Its 3.4-inch wide profile and innovative steer tube mounting system will work on most suspension and rigid forks. - Durable all-weather polypropylene blade - Mounts to most suspension and rigid forks - Includes hardware to fit small, standard and oversized tapered steerer tubes (18.5-34.5mm ID) - Eyelets Required?: No - Wheel size: 26", 650b, 29" and 700c - Dimensions: 85mm wide x 600mm long - Max tire width: 2.1" - Weight: 160 grams
$19.99
The Grunge Rear seat post mounted fender is designed with an 85mm wide profile to shield your rear end from spray, mud and crud. It'll keep you clean on your commute or when ripping around on singletrack. - Durable all-weather polypropylene blade - Quick release seatpost mount attaches and removes in a snap - Features fender angle adjustability to fit most bikes and dial in spray protection - Eyelets Required?: No - Wheel size: 24", 26", 650b, 29" and 700c - Fender width: 85mm wide x 460mm long - Max tire width: 2.25" - Weight: 174 grams
$19.99
This super lightweight (45g) and discreet mudguard protects your face from mud and water. Made of super soft material it fits to 26", 27.5" and 29" bikes and is compatible with most forks. The Flapguard Mudguard sticks close to your bike even in extremely aggressive riding due to the supplied zip ties, which wrap around the fork bridge and fork legs. Mud is also kept off your fork seals. Also compatible on rear side of frame.
$19.99
Turn your bike into an all-weather vehicle with SKS's Beavertail Fender Set! The robust steel brackets provide safe and easy mounting, and the front fender works with most suspension forks.
$19.99
Keep water and mud at bay with SKS's Dashblade fender! It's light and easy to install and remove thanks to its quick-release strap that fits a wide variety of seatposts and seat tubes.
$19.99
Stay clean and dry with SKS's Velo42 Urban fenders! The rear snap-on fender attaches to seat tubes between 25 and 35mm in diameter to give you full coverage from road spray. These fenders fit tires up to 32mm wide.
$19.99
No matter the conditions, stay dry and clean with SKS's X-Tra Dry rear fender! It's super light and nearly unbreakable so you know it's ready for the miles, on road and off. Plus, it works with most bikes thanks to its easy-to-adjust seatpost mounting strap.
$19.99
No matter the conditions, stay dry and clean with SKS's X-Tra Dry rear fender! It's super light and nearly unbreakable so you know it's ready for the miles, on road and off. Plus, it's longer and fatter than the regular X-tra Dry so it works great with 29ers and fatter 700c tires. It's also a breeze to attach with its easy-to-adjust seatpost mounting strap.
$19.99
Our hugely successful fender range is now expanded to include newer models. This version is specifically designed for the latest generation of FOX 36 forks as well as FOX 38 fork models. The fender mounts directly to the fork using two screws in the crown and the bleeding ports (no zip ties here!) Integration at it's finest, now with added mud protection compared to the first generation with additional seal protection thanks to the side walls. 2 Torx screws and Torx and hex tools included for installation.
$19.99
Much like our regular Trail fenders, the DH fender integrates perfectly with a Fox 49 fork to offer the perfect solution for when trail conditions are of the wet kind. Fully customizable, you can mount the full set, (extending either side of the fork) or the rear part only depending on riding conditions. Our solution is screwed securely into the bridge, no need for zip ties for the ultimate clean look. Fully compatible with both FOX 40 / 27" and FOX49 / 29" wheel size thanks to 2 sets of mounting holes. - Designed for FOX 40 and 49 forks - Optimized fit through two screws on fork arch - Can be mounted as single rear or front + rear parts - Highest level of integration, durability and protection from mud - High-impact resistant composite - Approximate Weight: 107g, hardware included - Dimensions: 250mm
$19.99
The Syncros Trail Fender is made from a high-quality Impact PP that balances stiffness and durability. Designed to work specifically with Fox 34 & 36 Boost forks, the Trail Fender features a 2-bolt direct mount. This means a clean and reliable mount that is easily removable.
$19.99
Tacky trails and damp roads, they're what dreams are made of. That doesn't mean we want our faces plastered with the muck that comes along with them. Using nothing more than a handful of zip ties, WTB's minimalistic mud guard attaches to your fork in less than a minute to keep your vision free of mud and focused on the turn ahead.
$21.00
Just the thing for rainy weather, the Portland Design Works minimalist Origami Rear Seatpost Fender attaches to a clamp-on bracket you mount to your seatpost. And it packs down so you can easily store it when not in use. - Length: 445mm (7.5") - Weight: 160g (5.6oz)
$21.00
Portland Design Works' neat Sodapop Fenders are made from 97% post-consumer recycled bottles. They pop on and off with ease, keep you dry in the rain, and get one back for the planet, too! - City width: 48 mm at tail - Mountain width: 64 mm at tail
$21.99
- Suitable for tire widths between 23mm and 42mm - Cable routing friendly - Not recommended for use with non-housed/exposed rear brake cables - Keeps you clean and dry on wet roads and trails - Newly improved designs in multiple options for better coverage - Attaches quickly without tools - Stores easily in a backpack or jersey pocket - Application: Front - Fender Size: 390mm x 110mm - Wheel Size: Universal - Material: Polypropylene - Weight: 30g
$21.99
- Suitable for tire widths between 32mm and 55mm - Keeps you clean and dry on wet roads and trails - Newly improved designs in multiple options for better coverage - Attaches quickly without tools - Stores easily in a backpack or jersey pocket - Application: Front - Fender Size: 170mm x 90mm - Wheel Size: Universal - Material: Polypropylene - Weight: 21g
$21.99
Keep your little rider dry and clean with SKS's Rowdy fenders. They're compatible with a wide variety of frame types and feature durable mounting brackets for worry-free use.
$21.99
- Smart clip-on front mudguard for road, cyclocross, hybrid, gravel bikes, etc. - Fits a maximum tyre width up to 38mm. - It is the ideal companion to our S-BLADE rear mudguard. - Its smart, double hinged quick release fitting system also fits aero forks. - Paintwork protection film for the frame is included.
$21.99
Stay clean and dry with SKS's Velo 47 Trekking fenders! The universal mounting system attaches easily to most framers to give you full coverage from road spray. These fenders fit tires from 37 to 62mm wide.
$22.95
Topeak's DeFender RX rear fender offers durable rain and mud protection on wet and sloppy rides. It's incredibly light and easy-to-use, too. The quick-release seatpost attachment allows the DeFender to be installed and removed in seconds.
$22.95
Specifically designed for 27.5” and 29” wheeled MTB’s. The DeFender RX 279er fenders are the perfect choice for lightweight durable mud protection on those wet and sloppy rides. Quick release allows DeFenders to be installed and removed in seconds. A highly polished underside helps prevent dirt buildup and aids in cleaning. Fits 27.5” – 29” MTB tires up to 3” wide. - Clamp Diameter: Universal, endless strap type - Quick release allows DeFender to be installed and removed in seconds - Rear angle adjustable - Injected molded nylon - Dimensions (L x W x H): 22 x 4 x 6" - Weight: 226 grams
$23.99
- Suitable for tire widths between 23mm and 35mm - Keeps you clean and dry on wet roads and trails - Newly improved designs in multiple options for better coverage - Attaches quickly without tools - Stores easily in a backpack or jersey pocket - Application: Rear - Fender Size: 540mm x 65mm - Wheel Size: Universal - Material: Polypropylene - Weight: 50g